How to Jailbrk iOS 6.1.6 Using Redsn0w

How to Jailbrk iOS 6.1.6 Using Redsn0w and P0sixspwn

If you’re an iPhone 4, iPhone 3GS or iPod touch 4G user and upgraded to iOS 6.1.6, which was relsed recently to fix a critical SSL bug then the good news is that it is still possible to perform an untethered jailbrk on your iOS device using a combination of Redsn0w and p0sixspwn.

In this article we show you how to jailbrk iOS 6.1.6 first using Redsn0w, and then converting it into an untethered jailbrk using p0sixspwn Cydia package.

Here are some important points to note before you proceed.

-This guide is mnt for iPhone 3GS and iPod touch 4G users as iOS 6.1.6 is compatible with only these devices. If you’re looking for a jailbrk for iOS 7 or higher then checkout our jailbrk page for links to the latest tutorials.
Warning: If you depend on Ultrasn0w to unlock your iPhone, then DO NOT update to iOS 6.1.6.

Plse note that jailbrking your iOS device may void your warranty and hence proceed with caution and at your own risk.
Plse do not forget to backup your iOS device before you proceed. You can refer to this post for instructions on how to backup your iOS device using iCloud or this one to backup your iOS device using iTunes.
Plse ensure you are running latest version of iTunes.
This method uses an iOS 6.0 jailbrk with the iOS 6.1.6 filesystem, so it could cause some unknown issues.
You can follow these step-by-step instructions to jailbrk your iPhone 3GS and iPod touch 4G on iOS 6.1.6:

Step 1: Download Redsn0w 0.9.15b3 (Redsn0w 0.9.15 beta 3) from this link and save the appliion in a folder named “Redsn0w” on your desktop.

Step 2: Download iOS 6.0 firmware file (yes, the trick is to point Redsn0w to the iOS 6.0 firmware file and NOT iOS 6.1.6 firmware file) for your iOS device from the links mentioned below:

iPhone Note: Plse ensure you download the correct iOS 6.0 firmware file for your iPhone model. Check this link if you need any help in identifying which iOS firmware file to download for your iPhone model.
iPod touch
Step 2: Connect your device to the computer and double click the Redsn0w zip file and extract the appliion. Navigate to the Redsn0w folder and launch the Redsn0w appliion.

7 users should run the exe in XP compatibility mode (right-click on the Redsn0w exe and select Properties, then select the Compatibility tab and select Run this program in compatibility mode for XP). XP and 7 users should run Redsn0w as ‘Administrator’ (right-click on the Redsn0w exe and select ‘Run as an Administrator’).

Step 3: Click on Extras button.

Step 4: Then click on the Select IPSW button. Navigate and select the firmware file download in Step 2. It should successfully identify it and inform you that it will be used in the rest of the session.

Step 5: Go back to Redsn0w’s main page and click on the Jailbrk button.

Step 6: Redsn0w will now start preparing the jailbrk data.

Step 7: You will now be prompted to select the jailbrk options. Make sure Cydia is selected and click on the Next button to continue. You can also select Enable battery percentage option.

Step 8: You will now be prompted to put your iOS device into the DFU mode. Turn off your device, however keep it plugged in to the computer.

Step 9: Click on the Next button. Redsn0w will take you through the necessary steps:

(a) Hold the Power button on your iOS device down for 3 seconds:

(b) Now simultaneously hold the Home button and keep the two buttons pressed for 10 seconds:

(c) Now relse the Power button while keeping the Home button pressed until Redsn0w detects the device:

Note: Check this tutorial if you’re having trouble putting your device in DFU mode.

Step 10: Your iOS device should reboot now. Plse remember to relse the Home button.

Step 11: Your iOS device will reboot again and Redsn0w will now begin uploading the new RAM and kernel.

Step 12: You will be notified once the jailbrking process is complete. Click on the Quit button to exit the appliion.

Step 13: The rest of the process will take place on your iOS device, wait for it to complete. Your iOS device will reboot once again (which could take approximately 5 minutes). You will now see the Home screen on your iOS device, but Cydia would still be missing, that’s because you still need to tether boot your iOS device using Redsn0w. So follow the steps mentioned below.

Boot tethered:

Step 14: Launch Redsn0w again.

Step 15: Click on Extras button.

Step 16: Then click on the Select IPSW button. Navigate and select the firmware file downloaded in Step 2.

Step 17: Then click on the Just Boot button.

Step 18: You will now be prompted to plug your iOS device to the computer and switch it OFF again. Follow the instructions and click on the Next button to move to the next screen:

Step 19: You will now need to put your iOS device into the DFU mode. Redsn0w will take you through the necessary steps:

(a) Hold the Power button on your iOS device down for 3 seconds:

(b) Now simultaneously hold the Home button and keep the two buttons pressed for 10 seconds:

(c) Now relse the Power button while keeping the Home button pressed until Redsn0w detects the device:

Step 20: Redsn0w will recognize the iOS device in DFU mode and apply the limerain (remember to relse the Home button). Your iOS device will reboot and a pinpple logo will appr, indiing a tethered boot.

Step 21: Wait for the process to complete, once it is complete, you should see the Lock screen on your iOS device.

Your iPhone or iPod touch has now been successfully jail and you should see Cydia on the Home screen. If you don’t find it on the Home screen, plse don’t panic, srch for it using Spotlight. The jailbrk is currently a “tethered” jailbrk,

Convert Tethered Jailbrk to Untethered Jailbrk using P0sixspwn:

Step 22: Launch Cydia. Since you’re launching Cydia for the first time, you may be prompted to do an essential upgrade. Plse go ahd and do it, and then relaunch Cydia again.

Step 23: Tap on the Srch tab, and srch for p0sixspwn.

Step 24: Tap on p0sixspwn from the srch results, tap on Install, followed by the Confirm button.


Step 25: Tap on Return to Cydia when prompted.

That’s it, your iOS device has now been successfully (untethered) jail.

Troubleshooting Tips:

1. Can’t find Cydia:

If you can’t find Cydia on the home screen then double check you have tethered boot your device. Plse ensure you’ve followed steps 14 to 21.

2. Unsupported IPSW:

If you get an error message informing you that the IPSW is not supported by this version of Redsn0w, then it mns you’ve downloaded iOS 6.1.3 firmware file in step 2 instd of iOS 6.0 firmware file. Plse download iOS 6.0 firmware file to jailbrk your iOS device running on iOS 6.1.3.

3. Cydia closes immediately:

If Cydia closes immediately when you try to launch it, it mns that you haven’t installed p0sixspwn package from Cydia. Follow steps 22-24 mentioned above to solve this issue.​