latest update Octoplus JTAG v.1.7.6 - more models added for USB

Octoplus JTAG v.1.7.6 - more models added for USBWe have added boot repair via USB and small TP for D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Octoplus Box JTAG Software v.1.7.6 Relse Notes

Added support for the following models:- D170 - added Dd Boot/Device Repair via USB
- D175F - added Dd Boot Repair via USB
- D180F - added Dd Boot Repair via USB
- D400H - added Dd Boot Repair via USB
- D400HN - added Dd Boot Repair via USB
- D405 - added Dd Boot Repair via USB
- D405H - added Dd Boot Repair via USB
- D405N - added Dd Boot Repair via USB
- D405TR - added Dd Boot Repair via USB
- D415 - added Dd Boot Repair via USB
- D724 - added Dd Boot/Device Repair via USB
All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, plse follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)Check PC Device Manager, a new device should appr "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSBRelse testpoint and press “syRepair” button in the software (or “Connect” button, when in Advanced Mode)








Download Octoplus Box JTAG Software v.1.7.6
Find out more at: www.octoplusbox.com